« Back to Facilities Management News Home
New York City – Dec. 18, 2014 — The new family of Wet/Dry Video Inspection Systems from General Tools & Instruments give plumbers and contractors an industry-first: borescopes that are entirely leak-proof.
Other so-called waterproof scopes on the market lack watertight grips and monitors. The probes, grips and monitors of General’s new wet/dry scopes are all guaranteed leak-proof to a depth of 1m (IP67 standard). All three components also will resist leaks at depths up to 2m for short periods of time.
Like all video inspections systems, these models allow for the visual inspection of inaccessible or hazardous areas in order to identify and diagnose hidden problems without disassembly or teardown.
Available in non-recording and recording models, the new scopes enable inspections underwater and where running water is present, making them ideal for plumbing tasks such as examining toilets, broken water lines, and sewer pipes, not to mention flooded basements and undersides of boats.
The scopes work equally well in dry conditions and can tackle typical HVACR inspections like detecting leaks and cracks in ducts and piping, checking for corrosion and deposit buildup, and reading hidden part and serial numbers. And gone is the worry about accidentally dropping the unit in water.
Here are the models in General’s new family of Wet/Dry Video Inspection Systems:
• DCS600A: Wet/Dry Video Inspection System with 8mm Diameter Probe
• DCS605: Wet/Dry Video Inspection System with 5.5mm Diameter Probe
• DCS660A: Wet/Dry Recording Video Inspection System with 8mm Diameter Probe
• DCS665: Wet/Dry Recording Video Inspection System with 5.5mm Diameter Probe
Each of the above systems includes a 1m long, camera-tipped, VGA resolution (i.e., 640 x 480 pixels) flexible-obedient probe with four adjustable LEDs. And those probes are all interchangeable. Three other optional interchangeable probes are compatible with all of the systems in the family: an 8mm diameter probe in lengths of 3 or 5 meters, and a 10mm diameter, 20m long pipe inspection probe and reel set.
