fnPrime




« Back to Facilities Management News Home

« Power & Communication

ABB LV Products Introduces The F200 GFEP Device To Protect Equipment Against Damaging Line-To-Ground Currents



 

The F200 GFEP disconnects all ungrounded conductors to the faulted circuit, preventing costly damage to electrical systems and equipment

 

NEW BERLIN, Wisc. – The ABB Low Voltage Products division has introduced the F200 Ground Fault Equipment Protector (GFEP), designed to protect equipment against damaging line-to-ground currents by disconnecting all ungrounded conductors of the faulted circuit.  A ground fault is caused by an insulation loss between a live conductor and an exposed conductive part that creates a flow of current to the ground. Most short circuits initially manifest as ground faults, which, if undetected, can cause serious and costly damage to electrical systems and equipment. An ABB F200 GFEP added to an electrical system trips when the system leaks a significant current to ground, immediately preventing the potential short circuit before such damage can occur.

 

The ABB F200 GFEP line consists of the 2 pole F202 for single phase networks, and the 4 pole F204 for split phases, Delta and Wye networks. All variations are compliant to the UL 1053 standard for ground fault sensing and relaying equipment, and in accordance with the National Electrical Code, ANSI/NFPA 70 for use in ordinary locations. The F200 GFEP immediately detects ground faults by continuously measures the current balance between live conductors and the neutral using a toroidal current transformer.

 

“Ground faults can result in accidents that can cripple production, disrupt supply chains and damage expensive equipment. GFEP devices provide a layer of protection beyond standard technology, such as circuit breakers,” said Jeff Disbrow, product manager for ABB Inc. surge protection and ground fault devices. “GFEP devices are not intended for people protection in the U.S., but by creating a safer environment for the equipment they are creating an environment that is safer for people too,”

 

F200 GFEP devices can be applied to most electrical networks up to 480VAC, and can be installed in distribution panels and on critical equipment. They are suitable for a variety of industrial and commercial applications including: oil and gas, water and wastewater treatment, water pumps for fountains and irrigation, pharmaceutical manufacturing, semiconductor facilities, outdoor installations, and heating equipment. The use of GFEPs is mandatory for outdoor electric deicing and snow-melting equipment, and OEM machinery equipped with the devices will be protected against potentially costly repairs and downtime.

 

There are several key features which distinguish the ABB F200 line from other GFEPs on the market, including:

·         Bi-directional cylindrical terminals for safe and easy connections.

·         Two terminals on each devise, one for cables up to 10 mm2 and one for cables up to 25 mm2, allowing the connection of two independent cables in the same device.

·         DIN rail mountable functionality.

·         The ability to use the devices in ambient conditions with surrounding atmosphere temperature ranges from -13° F to +131° F.

Using the F200 GFEP in series with ABB’s UL 489 S200 U and S200 UP miniature circuit breakers will ensure complete protection of the circuit from overload, short circuit and ground fault.

 

----------------------------------------------------------------------------------------------------------

 

About ABB
ABB (www.abb.com) is a leader in power and automation technologies that enable utility and industry customers to improve performance while lowering environmental impact. The ABB Group of companies operates in around 100 countries and employs about 130,000 people.

 

About ABB Low Voltage Products

The ABB Low Voltage Products division (www.abb.us/lowvoltage) manufactures low-voltage circuit breakers, switches, control products, wiring accessories, enclosures and cable systems to protect people, installations and electronic equipment from electrical overload.





Contact FacilitiesNet Editorial Staff »   posted on: 11/25/2013


More From 11/25/2013 on FacilitiesNet