« Back to Facilities Management News Home

« HVAC

FabricAir's VarioDuct


FabricAir®, Lawrenceville, Ga., a manufacturer of fabric HVAC duct and accessories, has introduced the VarioDuct, a highly engineered solution for most commercial building applications that provides both uniform heating and cooling out of the same ceiling-hung fabric duct.

 All ceiling-hung ducts are conducive to air conditioning since cool air descends through the occupied zone. However, VarioDuct’s unique design overcomes the natural convection characteristics of heated air to provide uniform cooling and heating temperature gradients from the same straight run of duct. Numerous efficiency studies have proven uniform air dispersion results in reduced mechanical equipment runtimes. Consequently, VarioDuct provides unprecedented air comfort and saves up to 25-percent in energy costs vs traditional metal systems.

This heating and cooling uniformity from the same duct run is made possible with a full length internal membrane that’s positioned via a mechanized damper to disperse either warm air through its bottom hemisphere or cool air through its top hemisphere. When the membrane is positioned to block the duct’s top hemisphere vents during heating mode, the VarioDuct’s bottom hemisphere’s precisely engineered OriFlow orifices, NozzFlow nozzles or JetFlow jets capably disperse warm air down to the occupied level regardless of ceiling height. The opposite occurs for cooling mode as the membrane is positioned to block the bottom hemisphere’s vents to disperse cold air through the top hemisphere’s SonicFlow or MicroFlow vents promoting a natural descent to the occupied zone. A minimum static pressure of 0.2-iwg (50-pa.) is required to hold the membrane in place during heating mode.

The mechanized damper/hoop that positions the membrane is part of a flanged, 14-inch-long (355-mm) galvanized steel inlet collar assembly. The hoop can be switched between heating and cooling modes via a manually-operated hand crank, or automatically via a motorized actuator activated by a thermostat or building automation system (BAS).

VarioDuct can be ordered in FabricAir’s permeable or non-permeable Combi or Trevira fabric, both which are applicable to conventional commercial and mission critical applications. Combi and Trevira are UL and CSA-listed and are accepted by all building codes in compliance with NFPA 90A-2018.

 VarioDuct is available in any length and in diameters ranging from 16 to 32-inch-diameter (400 to 800-mm). It can be hung with a variety of FabricAir suspension systems depending on project aesthetics. All of FabricAir’s unlimited color palette hues and graphics, such as patterns and custom logo inscriptions, are available for VarioDuct.

Other VarioDuct features are:

  • Membrane is made of same material and color as the duct and blocks vents with minimal leakage;
  • Damper/hoop assembly is lighter, yet sturdier than competitors;
  • The damper/hoop, which uses a longer-lasting square shaft, can be specified automatic with an onboard 120V, 24V or 230V motorized actuator by Belimo, Danbury, Conn.;
  • Can be value-engineered by substituting the motorized damper/hoop assembly with a manually-operated crank for switching between heating and cooling;
  • Designed for 1,000 to 1,600-fpm;
  • 5-year warranty

For more information on the VarioDuct or other FabricAir duct and accessories, please visit www.fabricair.com.





Contact FacilitiesNet Editorial Staff »   posted on: 8/23/2019


More From 8/23/2019 on FacilitiesNet