Blade UPS Power System - Eaton's Electrical Business - Facility Management Product Release

Eaton's Electrical Business
website | Company information

System fits into a standard 19-inch rack and delivers power protection from 12kW to 60 kW. Input and output voltages are 230-400V or 120-208V, and frequency is 50 or 60 Hz. Backup time is typically 14 minutes. Battery type is VRLA-AGM, and runtime is 12 minutes at 50 percent load, and 4.7 minutes at 100 percent load.

Extended battery modules are available. The three-phase system has heat dissipation of less than 371W/1266 BTU/hr at 100 percent rated load, and is fan cooled and temperature microprocessor monitored, with front air entry and rear exhaust.

Audible noise at normal operation is 50 dBA at 1 meter. The units include software containing LanSafe power management software.

RELATED CONTENT

Content Category: Power & Communication

FEATURES:

• Power Play: Preparing Microgrid Resilience
• Navigating Campus-Wide Power Upgrades with Smart Solutions
• Electric Phase Loss: Challenges and Solutions

QUICK READS:

• 3 Outdated Assumptions About Energy Management
• Arc Flash Labeling Best Practice Guide Available
• Are Your Occupants Stealing Electricity by Charging Cell Phones?

posted: 12/7/2006