Join our discussion with Facility Influencer John Rimer on Sept. 13
The Las Vegas show takes place Oct. 29-30. Members receive complimentary Elite Level access
Lennox Industries Inc.
website
| Company information
Humiditrol dehumidification system uses a hot gas reheat design to remove moisture based on relative humidity levels without affecting room temperature. The system provides up to eight times the moisture removal capability of a standard rooftop unit.
The system is controlled by the Integrated Modular Controller, which initiates dehumidification when the room temperature is satisfactory but humidity is above the desired set point. The fans and compressors are started and both the reheat and evaporator coils are activated. The mixed indoor/outdoor air is cooled and dehumidified as it passes through the evaporator coil. The cooled and dehumidified air is heated back to near room temperature as it passes through the hot-gas reheat coil.
The controller is activated based on input from humidity sensor, dehumidistat or third-party automation. Humidity can be monitored and controlled at the unit with the controller, with the company’s L Connection Network through the network control panel or from a computer or remote location with the L Connection network software.
The 3-way valve and check value are easily accessible in the unit’s compressor section. The system add-on board is located on the controller. Reheat coil is installed downstream next to the evaporator coil and is accessible through tool-less access panels.
The system is available only on the company’s L Series® and S-Class™ premium rooftop units.
FEATURES:
QUICK READS:
posted: 4/2/2007